RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.3)
9-25
Using the Transfer Temp Offset Option
This option adds an offset to the temp the printer is reading from the transfer roller. (
Note:
This setting should be used only make the temp of the transfer roller and the goal on LCD
match.)
•
Use the slider on “Image Transfer” tab to make adjustment for card stock. (
Note:
A “-”
Adjustment will increase the actual temp of roller.)
Print Tension Settings
Using the Ribbon Print Takeup Tension Option
This procedure controls the tension of the color Ribbon during printing.
•
Adjust the Ribbon tension
if the Ribbon wrinkle is appearing on the card. (
Note:
Adjustments moderately change the image length.)
Using the Film Print Takeup Tension Option
Caution:
The Film Drive sets the baseline for the Film Tension and should not be adjusted
by the reseller or the end User.
•
Adjustments moderately change the image length.)
