RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.3)
9-20
Using the Mag Top of Form Option
Step
Procedure
1
Enter a negative value to move the start of the magnetic data more toward
the leading edge of the card or the card output side of the Printer.
OR
Enter a positive value to move the start of the magnetic data toward the
trailing edge of the card or the card input side of the Printer.
•
Magnetic Data Direction:
The arrows on these buttons indicate the
direction the magnetic data will move on the card's Magnetic Stripe.
•
Maximum Adjustment Range:
The maximum adjustment range is ±
99. As a rule, 20 equals about .030"/. 8mm.) (
Note:
Keep this in mind
when adjusting this option to avoid over-adjusting.)
Caution:
If the negative value is set too high, the Printer may
start encoding before the card's Magnetic Stripe reaches the encoding
head.
