W
ITHOUT
C
OAX
*
W
ITH
C
OAX
21
(GB- '99)
*
M
ODY *
E
RRE
P/R
*
P
ROJECT *
P
UNTO
V
IRGOLA *
S
LIM
1385R.
The camera unit is used in the multi-way
video systems composed of:
- solid state camera (CCD) with auto iris,
3.6mm lens, infrared LEDs, electronic clima-
tization and anti-clouding circuits
- anodized aluminium front plate complete
with transparent theft-proof screen
- back-box
- aluminium rain shelter
- key and safety screws for fixing the plate
Technical data
Power supply
21±3Vdc
Operating current
0.26A
Video signal on 75
Ω
1Vpp
Minimum illumination
2 lux
Pixel number
291000
Horizontal frequency
15625Hz
Vertical frequency
50/60Hz
Lens
3.6mm; F5
Adjustable focus
0.1m ÷
∞
Opening of auto-iris
Operating temperature
-10°÷+40°
Maximum permissible humidity
90%RH
RP. Push-button panels with anodized alu-
minium front panel and buttons, complete
with name plate lights and height adjustable
contacts to compensate imperfections of the
wall. The electric door speaker can be fitted
inside the push-button panel.
The unit should be flush-mounted and the
microphone should be firmly attached to
the front panel to avoid feedback and to
obtain the highest audio quality.
R. Push-button panels provided
only with buttons. An electric door
speaker cannot be fitted inside. When
such panels are installed together
with the previous ones, a system with
over 12 calls is obtained (see table on
page 22).
RP100. 1-button amplified door station.
It can be used in all one-way video-intercom
systems where the camera unit is separated
from the audio door station or where 1 or more
audio door stations are needed. It is complete
with an amplifier, in both channels, electric
door speaker, volume control, anodized alu-
minium call button and front panel, rain shel-
ter and name plate light.
It can be installed on the wall with expansion
plugs or on a wall box.
RP 200. 2-button amplified door station.
Technical data
Power supply:
13Vac
Operating current: 130mA
Terminals
1
Receiver
2
Transmitter
C
Common call buttons
P1 Call button
P2 Call button
-
Ground
Alternate voltage input 13Vac
CAMERA UNIT
ELECTRIC DOOR SPEAKER
(amplifier)
AMPLIFIED DOOR STATIONS
337C. It features a double amplifier (receiver
and transmitter); receiver has volume con-
trol. It is applicable inside the RP, NP or TM
push-button panels (or in other push-button
panels by means of the adaptor art.299).
Provided with an electret microphone and
tropicalized speaker.
Terminals
1 Receiver
2 Transmitter
3 Power supply 6÷8Vdc -60mA
4 Ground
ErreP/R - TM - NP/N series
ErreP/R series
ErreP/R series
PUSH-BUTTON PANELS
Terminals
M Video ground (shield of coaxial cable)
V Video output signal 1Vpp (coaxial cable)
F General ground
A Alternate voltage input for name plate lights
and climatizing circuit 13Vac-40mA
H Positive power supply input for camera and
infrared LED’s 21±3Vdc-260mA