W
ITHOUT
C
OAX
*
W
ITH
C
OAX
11
(GB- '99)
PuntoVirgola series
MONITORS
Project series
PuntoVirgola series
Note: In the intercoms it is necessary to cut
the jumper W1 which links terminals 3 and 7.
Note: In the intercoms it is necessary to take
out the jumper which links terminals 3 and 7.
1
3
1
4
8
9
10
11
12
13
14
2
75
Ω
5
6
3
1
2
CT
5
6
3
1
2
CT
VC
Connection of 1 or max. 3 intercoms
parallel to the monitor.
These systems are not intercommunicating,
therefore all the models conceived for sys-
tems 4+1 can be used.
INTERCOMS
Supplementary push-buttons installation
Inserting of extra buttons.
Taking out of button caps.
1283. Back-box for PV1260 and PT5660W
monitors.
Place the box on the wall at a height of about
1.5m (4' 11") from the floor keeping the front
edges flush-mounted and vertical to the fin-
ished plaster.
*
M
ODY *
E
RRE
P/R
*
P
ROJECT
*
P
UNTO
V
IRGOLA
*
S
LIM
PT520. Two-colour intercom complete with
buzzer, spiral cord, electronic microphone
and 2 buttons that can be increased up to 10
by adding the single button unit art.PT501.
It can be installed on the wall with expansion
plugs or on a wall box.
PT520N. Colour: beige.
PT520W. Colour: white.
Terminals
1
microphone
2
loudspeaker
3
ground
5
door lock release button (max 1A)
6
buzzer (absorption 0.2A)
7
common push-buttons (
and 1)
9
electronic bell input
P1 service push-button (max 1A)
P2÷P9 service push-buttons (max 0.5A)
PT538. Table adaptor complete with ballast
base, connector, 13 wires cable. For all
Project intercoms.
PV260. Two-colour intercom complete with
buzzer, spiral cord, electronic microphone
and 2 buttons that can be increased up to 6 by
adding the single button unit art.SP10. It can
be installed on the wall with expansion plugs
or on a wall box.
PV260W. Colour: white.
Terminals
1
microphone
2
loudspeaker
3
ground
5
door lock release button (max 1A)
6
buzzer (absorption 0.2A)
7
common push-buttons (
and 1)
9
electronic bell input
P1 service push-button (max 1A)
P2÷P5 service push-buttons (max 0.5A)
TA60. Table adaptor complete with ballast
base, connector, 13 wires cable. For PV260
and PV260W intercoms.
Connection of the electronic bell SR40 inside
an intercom, Project series, to make inter-
communicating calls.
Connection of the electronic bell SR40 inside
an intercom, PuntoVirgola series, to make
intercommunicating calls.
aaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaa
