- 33 -
Mi 2446IGb
Lista kamer
Galeria
Aby zmieniæ nazwê wejœcia (np.: z “Wejscie glowne” do
“Kwiatowa”):
- wybierz wejœcie przez dotkniêcie pola z nazw¹ i wciœnij
“opcje”;
- wciœnij “zmieñ” i nastêpnie
;
- wciœnij “zmieñ” i przy pomocy klawiatury wyœwietlonej na
ekranie, wprowadŸ now¹ nazwê zgodnie z instrukcj¹ opi-
san¹ na stronie 20; wciœnij “zapisz” aby zatwierdziæ.
- wciœnij
, aby powróciæ do listy wejœæ
Uwaga
: Jeœli wyœwietlane s¹ dodatkowo oprócz funkcji “zmieñ”
funkcje “nowy” i “usuñ” oznacza to ¿e podczas programowania
nie zosta³a w³¹czona funkcja ochrony systemu. Szczególnie
zaleca siê aktywacjê funkcji ochrony aby zapobiec niezamierzo-
nym zmianom lub usuniêciom powoduj¹cym nieprawid³owe
dzia³anie systemu. Te ustawienia mog¹ byæ zmienione
przez zaawansowanych u¿ytkowników (patrz rozdzia³ “progra-
mowanie”).
To menu zawiera listê kaset zewnêtrznych pod³¹czonych w in-
stalacji. Lista jest przewijana przy pomocy strza³ek góra i dó³.
Dotknij ikonê po prawej stronie nazwy, aby wyœwietliæ obraz
z kamery z odpowiedniego wejœcia wraz z funkcjami takimi jak
opisano w sekcji “
Podgl¹d obrazu
”
To menu zawiera zachowane zdjêcia. Dla ka¿dego zdjêcia
wyœwietlana jest nazwa wejœcia, data i czas. Przewiñ zdjêcia przy
pomocy strza³ek góra i dó³. U¿yj przycisku Opcje aby usu-
n¹æ zdjêcie, u¿yæ jako ekran g³ówny lub wyeksportowaæ je na
na kartê pamiêci (jeœli zainstalowano).
Automatyczne lub rêczne wykonywanie zdjêæ
Jeœli wybierzemy ikonê automatycznego wykonywania zdjêæ
3 sekundy po otrzymaniu po³¹czenia monitor myLogic wyko-
na zdjêcie goœcia. Jeœli wybierzemy ikonê rêcznego wyko-
nywania zdjêæ u¿ytkownik mo¿e wykonaæ zdjêcie podczas po³¹-
czenia przez wciœniêcie ikony aparatu.
11:18
Lista kamer
Wejœcie g³ówn.
Ulica Polna
Wejœcie tylne
Opcje
02.07.10
30,3°
Monitor list
Gallery
To change the name of the entrance (i.e.: from “Main Entrance”
to “Oxford street”) you must:
- select the entrance by touching the name box and press
“options”;
- press “modify” and then
;
- press “modify” and, using the keypad displayed on the
screen, enter the new name following the instructions on page
20; press “save” to confirm.
- press
to go back to the entrance list.
Warning:
if the “new” and “delete” functions are displayed in
addition to “modify”, it means that the system protection
function was not activated during programming. It is strongly
recommended to activate the protection function in order to
avoid changing or deleting functions unintentionally and cause
the malfunctioning of the entire system. These settings can be
only changed by expert users
(see chapter "programming")
.
This menu contains the list of door stations connected to the
installation. The list can be scrolled with the up and down
arrows. Touch the icon on the right of the name to display the
image from the camera of the corresponding entrance, with the
same functions described in the section
“Monitor”
.
This menu contains the photos you have taken. The date, time
and entrance name are displayed for each photo. Scroll the
photos with the up and down arrows. Use the Options button
to delete them, use them as Home Page screen or export them
to the memory card
(if available).
Automatic or manual shoot
If you select the automatic icon, 3 seconds after receiving a
call, myLogic takes a photo of the visitor. If you select the
manual icon, the user can take a photo during the call by
pressing the photo camera icon. The icon against white
background indicates the active option.
11:18
Monitor list
Main entrance
Edison street
Back door
Options
02.07.10
30,3°
Summary of Contents for myLogic ML2262C
Page 55: ... 55 Mi2446IGb Notatki Notes ...