7
OPERATION
Warning: Always ensure the blending base (3) or the grinding base (8) is securely
screwed on and tightened onto the cup (1) or (6) before activating the appliance.
Connect the power plug
•
(5) to a wall outlet.
Position the cup
•
(1 or 6) with base (3 or 8) on the drive shaft (ill.
). To activate
the blender, align the tabs on the cup with the blending base or grinding base (3
or 8) and twist clockwise until it locks in place (ill.
e
).
To switch off the blender, turn it counterclockwise until it stops. Disconnect the
•
plug (5) from the wall outlet before removing the cup (1 or 6) from the power
base (4).
hint: Operate the blender for only as long as needed to reach the right consistency.
Never use the blender for more than 3 minutes at a time. After use, let it cool for at
least 3 minutes before you start using it again.
Turn the cup
•
(1 or 6) around, so that the blending base (3) or grinding base (8)
faces upwards. Unscrew the blending base (3) or grinding base (8) of the cup.
To ensure that the content stays fresh, screw supplied resealable lid
•
(13) on the
cup (1 or 6) (ill.
f
).
hint: Store any unused portions using the resealable lid (13) in the refrigerator.
To remove pulp or larger food particles from your drink, screw either shaker lid
•
with small holes (10) or shaker lid with large holes (12) onto the cup (1 or 6) (ill.
g
).
Cover cups
•
(1 or 6) with the lip rings (9) to enjoy the freshly made drink directly
out of the cup (ill.
h
).
Blender_104558_US_V4_121224.indd 7
12/24/12 2:41:10 PM
