18
CLEANING AND MAINTENANCE
Seal ring replacement
Remove the old seal ring from the base
•
(3 or 8) of your single serve blender
(ill.
k
).
Remove the replacement seal ring from the bag and clean it with warm soapy
•
water.
Make sure that the flat surface of replacement seal is facing downward; while the
•
curved side of the replacement seal is facing upwards (ill.
k
).
Careful not to touch the blades
•
(2, 7), press the seal ring firmly until it is properly
installed into the base.
Storage
Clean and dry all parts before storing. Store the blender in its box or in a clean, dry
place. Never wrap the power cord (5) around the blender. Always use the supplied
cord strap (11).
TROUBLEShOOTING
PROBLEM
CAUSE
SOLUTION
The motor rotates
very slowly.
Too much food in the cup
(1 or 6).
Remove some food and restart.
Add some liquid and start
blending again.
The motor does not
rotate.
The motor is overheated. Let the motor rest for at least
3 minutes and start blending
again.
If additional assistance is needed, please contact our Customer Assistance at
1-855-451-2897 (US).
TEChNICAL DATA
Rated voltage:
120V~, 60Hz
Rated power input: 240W
Rated current:
2A
Dimensions (LxWxH):
4.49 x 4.49 x 11.73inches
Weight (without package): 4.2lb
Blender_104558_US_V4_121224.indd 18
12/24/12 2:41:11 PM
