01
Protection switch
02
-
03
Table
04
Blade
05
Parallel guide
06
-
07
Protective casing
08
-
09
Table inclination
10
Cutting height setting
11
-
12
Blade tension
13
Upper wheel inclination
14
Cutting height lock
15
-
16
Casing lock
17
-
18
-
19
-
20
-
01
-
02
Table assembly
03
Blade assembly
- Blade positioning on wheels
- Blade tension setting
- Upper guiding block side block
and backstop setting
- Lower guiding block side block
and backstop setting
01
Blade setting ( > D-03)
02
-
01
Start-up and shutdown
02
Cutting height setting
03
Table orientation
04
Guide operation
05
Fixation on the workbench
06
-
07
-
08
-
09
-
EN
EN
Description and location of machine parts
Maintenance, recommendations and advice
Contents of box
Assembling the machine
Functions of the machine
Settings of the machine
FIG. A & B
FIG. C
FIG. D
FIG. E
FIG. F
01
Blade replacement ( > D-03)
02
-
03
-
01
Always use a suitable blade for
the material that is not damaged
02
Each time the blade is replaced,
check the settings
03
When idle, slacken the blade tension
slightly to relieve the strain on the machine
04
Do not use for cutting firewood
05
Check that the wood does not contain
any metal parts (nails, screws, etc.) liable to
damage the blade.
Replacing consumables
FIG. G
CAUTION: Perform the setting while
switched off and by hand.
Make sure that the strip does not touch
any metal or plastic part.
Transport
113289-3-Manual-F.indd 17
113289-3-Manual-F.indd 17
28/02/2020 17:35
28/02/2020 17:35
