FAP ES71A, Instruction Manual

Page: 9 / 25

Modela ES73 and ES74:
· After completing all the above steps, your machine is now ready to brew coffee;
· Turn the brew coffee button. After a few moments, Espresso will start to flow into the cups;
· The more water you allow to flow, the softer the coffee will be. The espresso will have a light
brown foam floating on top;
· To stop the water flow, simply turn the brew coffee to the initial position .
Models ES71A and ES75A:
· After completing all the above steps, your machine is now ready to brew coffee;
· Turn the switcher onto brew coffee position . After a few moments, Espresso will start to flow
into the cups;
· The more water you allow to flow, the softer the coffee will be. The espresso will have a light
brown foam floating on top;
·
To stop the water flow, simply turn the switcher onto brew coffee position again.
Models ES71A and ES75A
are equipped with an electronic timer which allows you to choose in
advance the quantity of espresso you want to flow to the cups. It will automatically stop when the
quantity is reached.
The water volume adjuster may be adjusted as desired. The half filled cup symbol represents a
short coffee (about 2 ounces for 1 cup). On the opposite side, the full filled cup represents a tall
coffee (about 8 ounces for 1 cup). Place the water volume adjuster at any point, depending on
the taste you prefer. The more water you use, the softer the coffee flavour will be; less water
means a stronger coffee flavour.
You can stop the water flow at any time by turning the switch onto brew coffee position .
Filter holder removal:
After having brewed coffee, wait 10 to 15 seconds before removing the filter-holder.
· To make more Espresso, or to remove the filter-holder, move handle to the left. Be careful, as hot
water will be on top of the ground coffee or on the top of the coffee pod in the holder;
· After Espresso preparation, rinse the the filter-holder and the used Cremaker filter.
Notes:
· If you have just used ground coffee and want to use a coffee pod now, simply turn ON the coffee
function of your machine, and let the water clean the remaining powder;
· With the coffee pod, you may prepare only one Espresso at a time.
6. PREPARING CAPPUCCINO
“Cappuccino” is the name given by the Italians to the mixture of Espresso and milk foam. This foam
is obtained by using the Cappuccino nozzle. Then the foam and a little bit of milk are blended with
the coffee.
Note:
use larger cups (5 –6 oz.) than those used for Espresso.
Preparing the appliance:
·
Remove the water tank by pulling it outward and fill it with cold water (water tank can also be
filled by raising the cover lid);
26