Fanvil X1S, User Manual

Page: 71 / 110

71
10.6.2
Network Settings
10.6.2.1
Network Settings

IP Mode
There are 3 network protocol mode options, IPv4, IPv6 and IPv4 & IPv6.
User could select available mode via “<” or “>”. The selected IP mode will be activated after pressing [OK]
button.
Picture 109 - Network mode Settings

IPv4
In IPv4 mode, there are 3 connection mode options: DHCP, PPPoE and Static IP.
Picture 110 - DHCP network mode
When using DHCP mode, phone will get the IP address from DHCP server (router).

Use DHCP DNS: It is enabled as default. “Enable” means phone will get DNS address from DHCP
server and “disable” means not.

Use DHCP time: It is disabled as default. “Enable” to manage the time of get DNS address from
DHCP server and “disable” means not.
Picture 111 - PPPoE network mode
When using PPPoE, phone will get the IP address from PPPoE server.

Username: PPPoE user name.

Password: PPPoE password.
Picture 112 - Static IP network mode
When using Static IP mode, user must configure the IP address manually.

IP Address: Phone IP address.

Mask: sub mask of your LAN.

Gateway: The gateway IP address. Phone could access the other network via it.

Primary DNS: Primary DNS address. The default is 8.8.8.8, Google DNS server address.

Secondary DNS: Secondary DNS. When primary DNS is not available, it will work.