Fanvil X1S User Manual Download Page 83

Page: 83 / 110

12.3 Network >> Advanced

Advanced network Settings are typically configured by the IT administrator to improve the quality of the
phone service. For configuration, query the

10.6 advanced

Settings.

12.4 Line >> SIP

Configure the Line service configuration on this page.

Table 19 - Line configuration on the web page

Parameters

Description

Register Settings

Line Status

Display the current line status at page loading. To get the up to date line
status, user has to refresh the page manually.

Activate

Whether the service of the line is activated

Username

Enter the username of the service account.

Authentication User

Enter the authentication user of the service account

Display Name

Enter the display name to be sent in a call request.

Authentication Password

Enter the authentication password of the service account

Realm

Enter the SIP domain if requested by the service provider

Server Name

Input server name.

SIP Server 1

Server Address

Enter the IP or FQDN address of the SIP server

Server Port

Enter the SIP server port, default is 5060

Transport Protocol

Set up the SIP transport line using TCP or UDP or TLS.

Registration Expiration

Set SIP expiration date.

SIP Server 2

Server Address

Enter the IP or FQDN address of the SIP server

Server Port

Enter the SIP server port, default is 5060

Transport Protocol

Set up the SIP transport line using TCP or UDP or TLS.

Registration Expiration

Set SIP expiration date.

SIP Proxy Server Address

Enter the IP or FQDN address of the SIP proxy server.

Proxy Server Port

Enter the SIP proxy server port, default is 5060.

Proxy User

Enter the SIP proxy user.

Proxy Password

Enter the SIP proxy password.

Backup Proxy Server
Address

Enter the IP or FQDN address of the backup proxy server.

Backup Proxy Server Port

Enter the backup proxy server port, default is 5060.

Basic Settings

Summary of Contents for X1S















































































































Search results

Summary of Contents for X1S

Reviews:

Related manuals for X1S

Brands by name

Popular brands

Fanvil X1S, User Manual

Search results

Summary of Contents for X1S

Reviews:

Related manuals for X1S

Brands by name

Popular brands