background image

2 Understanding of A2 two-port gateway   

A2 two-port gateway IP-based voice media access device is designed for operators, 

enterprises, residential users, and residential VoIP solution to provide network 

equipment. A2 two- port gateway into the analog voice information transmitted over 

IP networks, which use IP networks to transmit voice. It is full compliance with the 

SIP protocol standard, with the market most other SIP compliant devices and 

server-side. 

The gateway will play Internet network (either public network or private network) 

connecting with the public telephone network bridge. It provides two FXS analog 

voice interfaces, used for ordinary small business PBX or gateway (PBX).   

This site using the most advanced voice processing technologies, such as 

advanced voice compression standards, echo cancellation, dynamic voice 

detection, silence detection, ensuring Quality of Service (QoS), and voice quality 

comparable to regular PSTN phone. 

In addition, A2 two-port gateway also integrates a small router function. WEB 

comes through the gateway configuration page, simply configure the network 

parameters, can achieve multiple computers and network equipment, broadband 

access, ideal for small office and home users. 

Because this site has a wealth of features and related detailed configuration 

options, in your call to enjoy a stress free before you know your A2 two-port 

gateway.

 

2.1. The positive of A2 two-port gateway 

 

Summary of Contents for A2

















































Reviews: