manualshive.com logo in svg

Fanvil A2, Product User Manual, Page: 16 / 48

Share
Download
Fanvil A2 Product User Manual Download Page 16

Field Name 

explanation 

 

Active IP 

The current IP address of the gateway. 

Current Netmask 

The current Netmask address. 

MAC Address 

The current MAC address of the gateway. 

Current Gateway 

The current Gateway IP address. 

Get MAC Time 

Shows the time of getting MAC address 

Please select the proper network mode according to the network condition. 

A2 two-port gateway provide three different network settings: 

z

 

Static: If your ISP server provides you the static IP address, please select 

this mode, and then finish Static Mode setting. If you don’t know about 

parameters of Static Mode setting, please ask your ISP for them.   

z

 

DHCP: In this mode, you will get the information from the DHCP server 

automatically; need not to input this information artificially. 

z

 

PPPoE: In this mode, your must input your ADSL account and password. 

You can also refer to 3.2.1 Network

 

to quick set your network. 

Obtain DNS 

server 

automatically 

Select it to use DHCP mode to get DNS address, if you 

don’t select it, you will use static DNS server. The 

default is selecting it. 

 

If you use static mode, you need set it. 

IP Address 

Input the IP address distributed to you. 

Netmask 

Input the Netmask distributed to you. 

Gateway 

Input the Gateway address distributed to you. 

 

DNS Domain 

Set DNS domain postfix. When the domain which you 

input can not be parsed, gateway will automatically add 

this domain to the end of the domain which you input 

before and parse it again. 

Primary DNS 

Input your primary DNS server address. 

Alter DNS 

Input your alternate DNS server address. 

Summary of Contents for A2

















































Reviews:

No comments