![background image](http://html1.mh-extra.com/html/kas/s1/s1_how-to-set-up_3555034001.webp)
How to Setup
KAS S1 Gateway
STEP 1 - Download LockKeeper App:
Android
–
Scan QR code
iOS
–
Scan QR code
STEP 2 - Setup and Configure Gateway:
Scan QR to view latest online guides
There are two ways to setup the S1 Gateway. Please follow the instructions relevant to your wiring
requirements.
Note: You only need to follow one method.
PoE Option:
(LAN + Power Over Ethernet)
WIFI Option:
(DC Plug + WIFI)
Step 1: Power up
Plug the LAN cable into the base of the gateway as pictured.
Step 1: Power up
Plug the PC Plug into the base of the gateway as pictured.
Step 2: Activate with App
You will see a solid RED LED to notify you that the gateway is
powered and in config mode.
•
Login to LockKeeper and go to the Setup Tab.
•
Click the Gateway factory number to activate it.
•
For example GWS00163
Step 2: Activate with App
You will see a solid RED LED to notify you that the gateway is
powered and in config mode.
Login to LockKeeper and go to the Setup Tab.
Click the Gateway factory number to activate it.
For example GWS00163
Step 3: No action necessary
The gateway will automatically assign a dynamic IP address and
connect to the network.
Note: The LAN network must be DHCP enabled.
Step 3: Configure WIFI network
Enter your WIFI network SSID parameters and click config.