Numbered descriptions below refer to corresponding numbers on
1.
Zoom Control –
Turning this control ac
a.
In Shooting Mode –
i.
Turn the zoom control
ii.
Turn the zoom control
area of the frame
b.
In Playback Mode - use the zoom control as an index or playback lever.
2.
Shutter Release –
Activates the camera shutter release button
picture.
3.
On/Off -
Pushing this control activates the camera power switch button
4.
Mode Dial –
Turn this dial to change
Important Notice! It is recommended
camera inside the housing. Please
5.
Exposure Compensation Dial -
to the opposite direction.
a.
In order to set a higher exposure compensation value, rotate the exposure compensation dial
clockwise.
b.
In order to set a lower exposure compensation value, rotate the exposure compensation dial
counterclockwise.
6.
Cold-Shoe Mount for Lighting Accessories
on top of the housing by using a dedicated connector. For further information regarding such
connectors, please visit the Fantasea website
FG7X III R Housing Instruction Manual
7
to corresponding numbers on the top housing graphic
Turning this control activates the camera zoom button.
control clockwise to zoom out, increasing the area visible in the frame.
Turn the zoom control counterclockwise to zoom in, so that the subject fills a larger
area of the frame and for close-up and macro images to be taken.
use the zoom control as an index or playback lever.
ctivates the camera shutter release button and auto focus prior to taking
Pushing this control activates the camera power switch button and turns the camera on/off
to change shooting modes.
recommended to align housing and camera mode dials
Please refer to the section “Installing the Camera” for
Rotating this knob operates the camera’s Exposure Compensation
exposure compensation value, rotate the exposure compensation dial
exposure compensation value, rotate the exposure compensation dial
Shoe Mount for Lighting Accessories-
Enables mounting a flash, video light,
on top of the housing by using a dedicated connector. For further information regarding such
connectors, please visit the Fantasea website –
www.fantasea.com
Instruction Manual 20200220
graphic (previous page):
g the area visible in the frame.
the subject fills a larger
to be taken.
use the zoom control as an index or playback lever.
and auto focus prior to taking the
and turns the camera on/off.
s prior to installing the
” for more information.
Rotating this knob operates the camera’s Exposure Compensation Dial
exposure compensation value, rotate the exposure compensation dial
exposure compensation value, rotate the exposure compensation dial
video light, torch or focus light
on top of the housing by using a dedicated connector. For further information regarding such
