4.
If inserting a silica gel pack inside the housing in order to prevent moisture, it is best to insert it
on the left side of the camera,
mounts, where it doesn’t interfere with proper housing operation.
that the silica gel pack doesn’t stick out, or else it might interfere with the watertight seal of the
housing.
5.
If making use of the Vacuum System, make sure it is fully charged and turn it on prior to closing
the housing (see section “Hybrid Vacuum Safety System”).
FG7X III R Housing Instruction Manual
17
serting a silica gel pack inside the housing in order to prevent moisture, it is best to insert it
, in the slot midway up between the two rubber shock absorber
where it doesn’t interfere with proper housing operation. It is important to make sure
that the silica gel pack doesn’t stick out, or else it might interfere with the watertight seal of the
If making use of the Vacuum System, make sure it is fully charged and turn it on prior to closing
ousing (see section “Hybrid Vacuum Safety System”).
Image #
SIGNAL BOARD
Instruction Manual 20200220
serting a silica gel pack inside the housing in order to prevent moisture, it is best to insert it
rubber shock absorber
It is important to make sure
that the silica gel pack doesn’t stick out, or else it might interfere with the watertight seal of the
If making use of the Vacuum System, make sure it is fully charged and turn it on prior to closing
Image #10
Image #11
SIGNAL BOARD
