FANOX SIL-V, User Manual, Page: 86 / 212

www.fanox.com Rev.10 86/212
Activation level: 100%
Deactivation level: 90%
Blocked function if phase b voltage is lower than 45 volts
The frequency measurement is an average value of the frequency measured during 8 cycles. The
operating time will be the adjusted value plus a maximum of 160 ms (50Hz) or 133 ms (60 Hz)
corresponding to the necessary 8 cycles to achieve the frequency measurement.
78_1
78_2
Function permission : yes/no
Level: 1 to 25. (step 1°)
Reset time: 0.02 to 300 s (step 0.01 s)
Level accuracy: ±0.5°
Blocked function if phase b voltage is lower than 45 volts
Circuit breaker
monitoring
Maximum number of openings: 1 a 10000
Opening time: 0.02 to 30 s (step 0.01 s)
Closing time: 0.02 to 30 s (step 0.01 s)
Excess repeated openings: 1 a 10000
Repeated openings excess time: 1 to 300 min
BF
Function permission : yes/no
Opening failure time: 0.02 to 1.00 s (step 0. 01 s)
Function start: configurable by the user
74TCS
Function permission: yes/no
Operating time: 0.02 to 300 s (step 0.01 s)
Trip continuity, in circuits A and B
Configurable inputs
79
Function permission : yes/no
Hold permission: yes/no
Number of reclosings: 1 to 5
Reclosure times 1, 2, 3, 4, 5 : 0.02 to 300.00 s (step 0.01 s)
Hold time: 0.02 to 300 s (step 0.01 s)
Locking possibilities: pulse inputs, level inputs, commands.
Replacement time: 0.02 to 300.00 s (step 0.01 s)
Definitive opening time: 0.02 to 300 s (step 0.01 s)
25 (*)
Dead voltage level: 3 to 555 V (step 0.1 V)
Live voltage level: 6 to 999 V (step 0.1 V)
Voltage supervision time: 0.02 to 300 s (step 0.01 s)