c) As the initialization successfully ends, a REC input info menu appears on the lower
left corner of the picture and it starts to record while the program is playing in the
background;
d) Press KEY_DISPLAY to get the current recording information from the Info Banner,
such as current recording time and the recording progress. The recording time
depends on how much of the program has been recorded actually;
e) If the signal is not stable there may be some pause;
f)
The recording progress will stop when the device has no more free spaces if there is
no setting about when to end before. A warning massage pops up, the recording
process stops and it will keep on the normal playback process. Otherwise the
progress ends naturally when the timer is timeout. Also user could press KEY_STOP
to end recording manually;
(REC info and stop recording window)
g)
System will prompt user error message and try to continue recording if there are
some bad tracks in disk.
There are two methods to set a timer. As follows:
1. In the EPG menu user can preengage programs for watching or recording;
a) Pressing KEY_GREEN once is to preengage the program only for watching
the program and only play.
when timeout, it jumps to
b) Pressing KEY_GREEN twice is to preengage the program for recording (when
timeout, it jumps to the program and starts recording). if it is timeout in standby
mode, it will power on 2 minutes in advance and starts to record under background
without powering on the panel. To watch the program, user need to press
KEY_POWER;
c) The preengaged programs can be checked in Timer menu.
OSD Menu
Timer
Timer
Timer
Timer REC
REC
REC
REC
42
