Lumina 71
Animals feed place
34
11.5
Move
Animals feed place
tab page
Move
Move from feed place
Setting of the feed place the animals have been relocated from.
To feed place
Setting of the feed place the animals are being been relocated to.
Nbr of animals
Setting of the number of relocated animals. The value between the brackets shows the
number of present animals.
If not all the animals are moved, the remaining animals stay at the old feed
place. The control computer will feed these remaining animals based on the
current feed data (weight, feed curve, biorhythm etc.).
The new feed place adopts the feed curve and feeding cycles of the old feed
place provided there are no animals present at the new feed place.
Weight per animal
Setting of the animal weight.
If animals are already present at the new feed place, the control computer will
not use the curve day at the new feed place.
The control computer uses this to calculate the curve day and total weight.
Total weight
Setting of the total animal weight (kg).
Date
Setting of the date the animals were relocate.
Consmp. factor
Setting of the consumption factor so the animals consumed less or more feed than the
average amount.
With a
Consmp. Factor
of 1 the animals have consumed all the feed (100%).
If the animals have consumed 90% of the feed enter a
Consmp. Factor
of
0.9.