41
TROUBLESHOOTING
10
The CSL Elite Pedals and/or the CSL Elite Pedals LC must not be modified dif
-
ferently than described in this manual. Endor® AG expressly prohibits analysis
and utilization of the electronics, hardware, software and firmware contained
in the controller. In case difficulties occur in connection with utilization of the
CSL Elite Pedals and/or CSL Elite Pedals LC, please use the following guide
for elimination of errors. On the website www.fanatec.com/support you will find
further details and contact data.
If the CSL Elite Pedals and/or CSL Elite Pedals LC is not working properly:
Problem description
Solution
After firmware update of the CSL Elite Pedals LC
may manually calibrated positions are lost.
After doing a firmware update on the CSL Elite
Pedals LC the manually calibrated pedal posi-
tions have to be be manually calibrated again.
See chapter ‘Pedals manual calibration’ and also
Chapter Firmware update procedure’ of this
manual for more details.
The PC driver or the wheel base does not recog-
nize the CSL Elite Pedals / CSL Elite Pedals LC.
Make sure that you have updated your ClubSport
USB Adapter firmware or CSL Elite Pedals LC
firmware to the latest firmware version which can
be downloaded from www.fanatec.com/ support.
Make sure that you have updated your Fanatec
wheel base to the latest firmware version which
can be downloaded from
www.fanatec.com/ downloads.
Make sure that you have updated your PC driver
to the latest version which can be downloaded
from www.fanatec.com/ downloads.
Make sure that the used RJ12 cable is plugged
to the correct ports at CSL Elite Pedals bottom
side and at ClubSport USB Adapter or wheel
base.
Make sure that the used cable (USB or RJ12) is
plugged to the correct ports at CSL Elite Pedals
LC bottom side and at PC or wheel base.
Pedal signal of CSL Elite Pedals and/or CSL Elite
Pedals LC behaviour in game feels strange.
Connect the CSL Elite Pedals and/or CSL Elite
Pedals LC to PC directly or through the wheel
base. Start the PC driver and check the indicator
bars of each pedal during pressing the corre-
sponding pedal.
On CSL Elite Pedals LC you may need to do
manual calibration of minimum and / or maximum
positions or reactivate the ‘Enable manual cali-
bration mode’ to adjust the pedal signal behav-
iour according to your favour.
Summary of Contents for CSL Elite Pedals
Page 1: ...Manual www fanatec com...
