35
When the firmware update has been finished the CSL Elite Pedals LC will re
-
boot automatically. As described on the Firmware Updater window please close
the Firmware Updater application. Open the driver window again and check the
CSL Elite Pedals LC functionality and calibration before next use.
IMPORTANT:
The CSL Elite Pedals LC is secured by firmware and
by driver so that usually it is not possible to install wrong firmware files
on the CSL Elite Pedals LC! Do not try to force installation of any wrong
firmware to the CSL Elite Pedals LC to avoid damages.
IMPORTANT:
After firmware update the manually calibrated pedal po
-
sitions of the CSL Elite Pedals LC have to be manually calibrated again.
Otherwise the CSL Elite Pedals uses the automatically calibrated posi-
tions after pressing down each pedal to 100% of mechanical travel. See
chapter ‘Pedal manual calibration’ of this manual for more details.
6.3. Start-Up procedure
Connect the CSL Elite Pedals LC to the PC or wheel base, when the device is
switched ON the CSL Elite Pedals are ON, too. The CSL Elite Pedals LC does
not have an ON/OFF switch.
Summary of Contents for CSL Elite Pedals
Page 1: ...Manual www fanatec com...
