background image

3

INDEX

1.  General 

 ............................................................................................................... 5-6

2.  Introduction 

 ........................................................................................................ 7

3.  Compatibility

 ....................................................................................................... 8

4.  Preparation 

......................................................................................................... 9-12

4.1 Package content CSL Elite Pedals

 ............................................................. 9-10

4.2 Part list CSL Elite Pedals

 ............................................................................ 10

4.3 Package content CSL Elite Pedals Loadcell Kit

........................................ 11

4.4 Part list CSL Elite Pedals Loadcell Kit

 ....................................................... 12

5.  Assembly

 ............................................................................................................. 13-26

5.1 Plan your configuration

 .............................................................................. 13

5.2 Mounting the the CSL Elite Pedals

 ............................................................. 14-15

5.3 Mounting the CSL Elite Pedals LC

 ............................................................. 16-18

5.4 Stabilizer bars (recommendation)

 .............................................................. 19-20

5.5 Hardmounting the CSL Elite Pedals and/or CSL Elite Pedals LC

 ........... 20-21

5.6 Attaching / detaching the pedal plate rubber covers

 ............................... 22

5.7 Attaching anti-skid pads

 ............................................................................. 22-23

5.8 Connections CSL Elite Pedals

 .................................................................... 24

5.9 Connections CSL Elite Pedals LC

 .............................................................. 25-26

6.  Functions & Features

 ......................................................................................... 27-38

6.1 PC driver software

 ....................................................................................... 27-32

6.2 Firmware and driver update

 ........................................................................ 32-35

6.3 Pedal auto calibration mode

 ....................................................................... 36

6.4 Pedal manual calibration

 ............................................................................ 36-38

7.  Electronic operation

 ........................................................................................... 39

7.1 Hotkeys

 ......................................................................................................... 39

8.  Cleaning

 .............................................................................................................. 40

9.  Maintenance

 ........................................................................................................ 40

10.  Troubleshooting

 ............................................................................................... 41-42

11. Serial number

 ..................................................................................................... 43

12. Trademarks

 ........................................................................................................ 43

13. Ecology Advice

 .................................................................................................. 44

14. FCC Compliance

 ................................................................................................ 45

15. CE Compliance

 .................................................................................................. 45

16. Warranty

 ............................................................................................................. 46

Summary of Contents for CSL Elite Pedals
















































Reviews: