42
Problem description
Solution
After startup the CSL Elite Pedals and/or CSL
Elite Pedals LC pedal signals are not correctly in-
dicated, can be verified at PC driver.
When powering ON the CSL Elite Pedals LC in
‘Auto calibration mode’ every pedal lever must be
pushed first to the maximum position and then
back to the minimum position. When pressing the
corresponding pedal lever then again the signal
from the corresponding pedal should be fine. See
chapter ‘Pedal auto calibration mode’ of this man-
ual for more details.
My PC does not boot when CSL Elite Pedals LC
are connected to USB before Windows is booted.
This phenomenon is related to some main board
manufacturers’ BIOS. In this case the it is required
to boot the PC first and then plug the CSL Elite
Pedals LC to the USB port.
Summary of Contents for CSL Elite Pedals
Page 1: ...Manual www fanatec com...
