background image

39

7.3.9 BRF (brake force)

BRF range: OFF   010 … 100 

BRF default: 050

This brake force modifiers give you the ability to adjust the brake feeling ac

-

cording to your favour: Increasing the BRF to 100 means the user needs to 

press the brake with minimum force to achieve 100% brake signal. Reducing 

the BRF to OFF means the user needs to press the brake only with maximum 

force to achieve 100% brake signal.
You can either check the brake signal level on the PC* driver or you can see it 

on the RevLEDs of the CSL Elite F1® Set and/or the attached steering wheel 

(depending on steering wheel type). To change the active value, move the di

-

rectional stick of the Fanatec

®

 steering wheel up or down. 

 NOTE

:

 The BRF parameter is only available when a supported pedal 

set is connected to the PEDAL port of the CSL Elite F1® Set. Please read 

the description and/or manuals of your pedals to verify if the BRF feature 

is supported. For reference, the CSL Elite Pedals LC (i.e. CSL Elite Pedals 

with Loadcell Kit) support this feature.

7.4    Revolution Lights (RevLEDs)

The CSL Elite F1® Set offers the RevLEDs feature integrated directly into the 

wheel base. This RevLEDs are usually mirrored with the RevLEDs of the steer

-

ing wheel. Games supporting the steering wheel 

RevLEDs by default will also support the wheel 

base RevLEDs.
Further, if games make use of it, the RevLEDs of the wheel base can indicate 

a different function than the Steering Wheel RevLEDs. Example: Wheel Base 

RevLEDs show the fuel level while the steering wheel RevLEDs indicate engine 

RPM and help the driver shift up at the best moment.
Beyond this in-game feature, the RevLEDs are also a helpful indicator in case 

of any unexpected behaviour: While the wheel calibration runs after power ON 

is proceeding, the RevLEDs of the wheel base show the current status. For 

example, if no steering wheel is attached or is attached but cannot be detected 

and identified, the three blue RevLEDs will not be lit.
After calibration run is completed the RevLEDs turn off automatically and the 

game or software takes control.

*PC compatibility not tested nor endorsed by Sony Interactive Entertainment LLC.

Summary of Contents for CSL Elite F1 Set





















































Reviews: