44
The following pictures show the instructions on the LED display of the CSL
Elite Steering Wheel (PS4
TM
version) but are similar on other Fanatec
®
steering
wheels:
. . . . . . . . . . . . . . . .
Neutral Position
. . . . . . . . . . . . . . . . . . . . . . .
Reverse
. . . . . . . . . . . . . . . . . . . . . . .
1
st
Gear
. . . . . . . . . . . . . . . . . . . . . . .
2
nd
Gear
. . . . . . . . . . . . . . . . . . . . . . .
3
rd
Gear
. . . . . . . . . . . . . . . . . . . . . . .
4
th
Gear
. . . . . . . . . . . . . . . . . . . . . . .
5
th
Gear
. . . . . . . . . . . . . . . . . . . . . . .
6
th
Gear
. . . . . . . . . . . . . . . . . . . . . . .
7
th
Gear
If your shifter has no 7th gear, acknowledge it by pressing
/
START (10)
when the shifter lever is physically in position of 6th gear. After all gears are
calibrated the LED display shows S_1 and the shifter is ready for use.
NOTE
:
If you did not intend to enter the shifter calibration mode sim-
ply complete the calibration process either without a connected shifter or
without moving the shifter lever. You may then leave the shifter calibra
-
tion mode at the end of the process. This has no impact on the CSL Elite
F1® Set original calibration itself and you can go ahead without a shifter.
