FAMC Mini, User Manual, Page: 92 / 98

92
MEMORY BACKUP / SNAPSHOTS
The LF+ Series have the ability to Store a snapshot of the current configuration into protected area. This memory can be
“recalled” to overwrite the active memory, or swapped back and fourth. This allows for A/B testing of a good
configuration, and new configuration being created.
It is up to the user to determine and remember which configurations are where. The system will not track A or B, it will
just save, restore or swap based on your request. MIDI dumps, transfers and editing work are only handled with the
Active memory area and will not impact, protect or otherwise see the storage area.
It is plausible to download a certain configuration into the controller. Then Create a snapshot. Then Load another
configuration into the controller. Effectively you now have two setups, which when “Swap CURRENT/Stored” is used,
will allow A/B’ing of two setups. While you can only access the Active data while running in an operating mode- it does
effectively allow multiple configurations on the fly if required.
The MEMORY functions are:
Erasing the Memory
Make Memory Snapshot
[SEL] to Program
Restore the Snapshot
[SEL] to Program
Swap Current/Stored
[SEL] to Program
Erase MEMORY
[SEL] to Program