FAMC Mini User Manual Download Page 60

Page: 60 / 98

Copy/Paste

Press

to begin Copy/Paste. The first time pressed, you will see “(COPY)” on the screen. Use the

and

buttons to select the new location. Press

again to make a copy in the

new location (press

to cancel the copy operation from continuing).

Editing the Page

For the remaining page parameters to edit, use the

and

buttons to scroll

back and fourth between the settings available. Use the various other lighted buttons to process the editing of the

current parameter on the screen.

Press

after each and every change you wish to keep, or it will not commit to memory and your

modification will be lost. Always save your changes prior to changing parameters.

Edit the full name following the User Guide section on “Editing Names”. The full name is used in certain menu
commands and is also displayed on the top of the LCD when a preset is active.

SCROLL

DOWN

SCROLL

EXIT

MENU LEFT

MENU RIGHT

SAVE

Edit Full Name
[3 Pre + 6 IA ]

Edit Nick Name
[3P x 6I ]

Summary of Contents for Mini



































































































Search results

Summary of Contents for Mini

Reviews:

FAMC Mini, User Manual, Page: 60 / 98

Search results

Summary of Contents for Mini

Reviews: