manualshive.com logo in svg

FAMC Mini, User Manual, Page: 27 / 98

Share
Download
FAMC Mini User Manual Download Page 27

 

27 

this command will allow you to do that. Please note that Pages and presets 

have a specific parameter to change IA-Maps. So this command would typically 

be used in either an IA-Slot, or Preset Step commands. 

40 

IF IA OFF STOP 

1 

Programming commands are processed in sequence. There may be times you 

would like to commands based on the state of other IA-Slots. This command 

will compare the IA State of the IA-Slot you choose. If the IA-Slot is OFF, then 
the programming will cease processing the remaining IA-Slots commands. 

41 

IF IA ON STOP 

1 

Programming commands are processed in sequence. There may be times you 

would like to commands based on the state of other IA-Slots. This command 
will compare the IA State of the IA-Slot you choose. If the IA-Slot is ON, then 

the programming will cease processing the remaining IA-Slots commands. 

Programming commands are processed in sequence. There may be times you 

would like to commands based on the state of other IA-Slots. This command 
will compare the IA State of the IA-Slot you choose. If the IA-Slot is OFF, then 

the programming will cease processing the remaining IA-Slots commands. 

42 

IF IA OFF SKIP 

1 

Programming commands are processed in sequence. There may be times you 
would like to commands based on the state of other IA-Slots. This command 

will compare the IA State of the IA-Slot you choose. If the IA-Slot is OFF, then 

the commands located below this IF test will process. If the IA-Slot is ON, then 

the next command to process will be the next IF command found. If a STOP 
command is encountered, the programming will cease processing the IA-Slots 

commands. 

43 

IF IA ON SKIP 

1 

Programming commands are processed in sequence. There may be times you 
would like to commands based on the state of other IA-Slots. This command 

will compare the IA State of the IA-Slot you choose. If the IA-Slot is ON, then 

the commands located below this IF test will process. If the IA-Slot is OFF, then 

the next command to process will be the next IF command found. If a STOP 
command is encountered, the programming will cease processing the IA-Slots 

commands. 

44 

IF TRIGGER SKIP 

0 

If the IA-Slot being processed was triggered by a programmatic change (not 
from the user pressing a button for that IA-Slot), then you can skip commands 

below it. In which case, the LF+ will look for the STOP command or the next 

IF… command and continue processing from there. This will allow you to 
execute commands only when a user presses the button associated with the 
IA-Slot being checked. An example would be where you want to ignore 

commands triggered by a group IA-Slot being turned OFF because the user 

pressed a different button in the IA-Group. In this case you could stop the 

processing of some/all of the off messages of the grouped IA-Slot (unless the 
user shut it off directly with a button press). Many uses for this outside of 

groups. 

Summary of Contents for Mini



































































































Reviews:

No comments