FAMC Mini, User Manual, Page: 15 / 98

15
Special Commands During Power Up
Powering on the Unit will always bring you back to the point you were last at before it lost power. Same preset, mode,
etc… There are certain commands that you can trigger by pressing buttons while powering on the unit.
Press and hold the following buttons while powering on the unit. Do not let go of the buttons until the unit completes its
startup process and the LCD changes to reflect your special command:
MENU System: Force the unit to enter Menu system before
do anything else.
Force unit to wait for MIDI Firmware before doing
anything else.
Expression Pedal Testing. LCD Display will show read-out
on a scale from 0-409. All buttons not pressed should
default to 409.
Force Preset Mode as startup mode
Force Song Mode as the startup mode
Force Expander mode as the startup mode, and set the
unit as an expander
+ + + CAREFUL. THIS PERMENENT. This will reset the unit to
all default settings and Page definitions, and it WILL
completely ERASE all of your programming to the system
defaults.
+ + + CAREFUL. THIS PERMENENT. This will reset the unit to
all default global settings. This will NOT erase your
presets, songs, set-lists, pages, IA-Slots, or Sysex Messages.
B8
B7
B6
B1
B2
B3
B5 B6 B7 B8
B1
B2 B3 B4