11
Grund- und Erweiterungsmodul anschließen
DE
Wollen Sie noch mehr wissen? Stillen Sie Ihren Wissensdurst auf
unserer Internetseite
www.faller.de
. Dort finden Sie interessante Hin-
tergrundinformationen und viele kreative Anregungen rund um das
Thema Modellbau.
TIPP
Funktionselemente anschließen
Über die Ausgänge der Module können verschiedene Verbraucher gesteu-
ert werden. Dies können zum einen die Funktionselemente von FALLER Car
System (Abzweigung, Parkplatz und Stopp-Stelle) sein oder andere Verbrau-
cher wie LED oder Lampen.
Hinweise:
Achten Sie beim Anschluss von LED immer auf die korrekten Vorwi-
derstände. Diese können Sie in der Software »Car System 2« über den
Menüpunkt Allgemein >> Vorwiderstandsrechner ermitteln.
Schließen Sie Parkplatz und Stopp-Stelle an 20 V an. Schließen Sie im
Unterschied dazu Abzweigung und Beleuchtungselemente an 15 V an.
Achten Sie beim Anschluss der Stopp-Stelle auf die korrekte Polung. Soll
ein Fahrzeug an dieser Stelle anhalten, muss der Nordpol nach oben wei-
sen. Testen Sie dies, indem Sie den Lenkschleifer über das Zentrum der
eingeschalteten Stopp-Stelle bewegen. Wird der Lenkschleifer abgesto-
ßen, ist der Nordpol oben. Soll dagegen ein Fahrzeug der FALLER Digi-
talserie an dieser Stelle seine zweite Fahrstufe abrufen, muss der Südpol
nach oben weisen.
Weitere Informationen zum Anschluss der Verbraucher entnehmen
Sie bitte der Bedienungsanleitung des jeweiligen Geräts.
TIPP