![background image](http://html1.mh-extra.com/html/falcon/f18/f18_owners-manual_3253542022.webp)
rudder system will not solve helm issues if other items on the boat are being
used or set improperly.
10.0 Spin Pole
Locate the spin pole and the line labeled “tack Line” in the rigging box. Feed the
tapered end of the tack line into the spin pole starting at the large oval hole located
approximately 1 foot from the base on the side of the pole. Feed the line all the way
through the tube to exit out the forward end of the pole. Install the spin bridal lines
in the end plug as shown and then feed the tack line through the middle hole in the
plug from the rear.
When first setting up your boat, you will need to rig the spin bag to the pole.
Locate the bundle of lines in the rigging box labeled “spin bag ties”. This will
include:
1 – 3mm by 7 foot (2.4m)
1 – 3mm by 4 foot (1.2m)
First feed 1 end of the 4 foot long section of line into the small hole drilled on the
side of the spin hoop. Tie a stopper knot. This will be used as a preventer line to
keep the spin sheets from wrapping around the hoop while dousing.
Second, tie the 7 foot long piece of line under the trampoline between the keepers
holding mid section of each foot strap. At this point the under tramp line will be
hung loose.
At this point connect the end of the spin pole to the front cross beam with the rigging
pin as shown.