Fig 4A
Fig 4B
6.0 – Mast Rotation
Find the 5/32” (4mm)line labeled “Mast Rotation”. Feed this line through the cleat
located on the hull just aft of the dagger board trunk, and then under the tramp. Bring
the line back up through the tramp at the grommet located in the center of the tramp
just aft of the storage pocket. Run this line through the turning block provided and back
through the center grommet, under the tramp and back up through the cleat on the
opposite hull.
Note: the turning block will be attached to the line run through the mast rotation arm on
the mast after the mast is stepped to control rotation.
