U109655 16
Australia
To remove metal rub-off
Sliding pans on the hob - especially aluminium or copper
pans - can leave marks on the surface. These marks often
appear like scratches, but can easily be removed using
the procedure described previously for 'Cleaning spills'. If
the rub-off marks are especially stubborn, use a cleaning
cream together with the razor scraper, as described in
'Cleaning burned-on spills'.
Glide-Out Grill
The grill pan and grid should be washed in hot soapy
water. After grilling meats or any foods that soil, leave to
soak for a few minutes immediately after use. Stubborn
particles may be removed from the grid using a nylon
brush. Alternatively, the grill pan can be washed in a dish
washer.
Before you remove any of the grill parts for cleaning,
ensure that they are cool, or use oven gloves.
The grill pan can be easily removed for cleaning, as
follows:
Remove the grill pan support frame by pulling the grill
pan forward:
Lift the grill pan clear of the support frame.
The support
frame is held to the side rails by two clips on each side:
For each side, support the side rail with one hand and
with the other hand lift the frame up and out of the side
clips:
For safety's sake, push the side rails back into the grill
chamber.
If you need to remove the side rails to facilitate the
cleaning of the grill chamber, you can unhook them from
the grill chamber sides and wipe the sides clean with a
soft cloth and mild detergent.
Do not
use any abrasive substances.
DO NOT put the side runners in a dishwasher.
Once you have finished, hook the side rails back onto the
sides of the chamber. To refit the frame, pull the side rails
forward and, for each side in turn, support the side rail
and press the frame down into the side rails. Replace the
grill pan.
When refitting the grill pan, ensure that the wide rim is at
the front:
Control Panel and Doors
Avoid using any abrasive cleaners, including cream
cleaners, on brushed stainless steel surfaces. For best
results, use a liquid detergent or our Multi-purpose
Cleaner.
The same cleaner can also be used on the doors.
Alternatively, use a soft cloth wrung out in clean hot
soapy water. You can use the same method for cleaning
Summary of Contents for Elan 90 Ceramic
Page 27: ...27 109655 Australia Circuit Diagram...
Page 30: ...U109655 30 Australia...
Page 31: ...31 109655 Australia...
Page 32: ......
