•
This appliance may be discoloured due to testing.
•
These instructions are only valid if the country code appears on the appliance. If
the code does not appear on the appliance, refer to the technical instructions for
adapting the appliance to the conditions for use in that country.
•
Installation must meet national or local regulations. Attention must be paid to:
safety (installation & use) regulations, health and safety at work act, local and
national building regulations, fire precautions act.
•
To prevent shocks, this appliance must be earthed.
•
This unit is fitted with an equipotential connection at the rear on the back.
•
This equipment is for professional use only and must be used by qualified
persons.
•
The installer must instruct the responsible person(s) of the correct operation and
maintenance of the appliance.
•
Only qualified persons are allowed to install, service or convert the appliance to
another gas type.
•
Gas appliances must have a stop cock fitted in the supply pipe work. The user
must be familiar with the location and operation of this device in order to turn off
the supply of gas in the event of an emergency.
•
These appliances have been UKCA/CE-marked based on compliance with the Gas
Appliance Regulations/Product Safety and Metrology Regulations for the Countries,
Gas Types and Pressures as stated on the data plate.
•
Unless otherwise stated, parts which have been protected by the manufacturer
must not be adjusted by the installer.
•
Check that no damage has occurred to the appliance or supply cord during transit.
If damage has occurred, do not use this appliance.
•
Ensure the supply cord is routed free from the appliance to avoid damage.
•
The appliance has been designed and approved to use Falcon kick plates; non
Falcon kick plates could potentially adversely affect the performance of the
appliance by restricting the air to the appliance.
•
All apparatus connected to a potable water network and including water drain
device has to be provided with an air break before its discharge to the drainage
system. Type AA.
PREVENTATIVE MAINTENANCE CONTACT
To obtain maximum performance from this unit regular servicing of the appliance should be
undertaken to ensure correct operation, it is functioning as intended, and safe to use. We recommend
servicing in accordance with SFG20 Maintenance Schedules and as a minimum, after 2,500 hours of
use, or annually, whichever comes
first and
that a maintenance contract be arranged with an
appointed service contact. Visits may then be made at agreed intervals to carry out adjustments and
repairs.