21
6.6 COMMISSIONING
Refer to section 2.0 for operation.
Carry out the following operation:
6.6.1 Turn the main gas supply on to the appliance.
6.6.2 Remove front facia as stated in section 8.1. Connect a suitable pressure gauge to the
test point on the manifold shown below.
6.6.3 Light one open top burner
6.6.4
Natural Gas Appliance only
– Adjust Governor as shown in section 8.9 to a manifold
pressure of 15mbar.
6.6.5 Light all burners at maximum position and inspect burner flame for flame stability and
colour.
6.6.6 Switch appliance off
If the appliance does not operate correctly please refer to section 10.0 and rectify the
problem.
PLEASE FILL OUT THE INFORMATION TABLE ON THE
FRONT COVER AFTER COMMISSIONING.