11
2.4 LIGHTING AND OPERATING THE OVEN BURNER
2.4.1 The appliance must be as clean as possible before use as an appliance left with debris
in or around its heating area can lead to fire.
SUITABLE PROTECTIVE CLOTHING AND ALL CARE
NECESSARY MUST BE USED WHEN WORKING ON A HOT
APPLIANCE. IT IS RECOMMENDED THAT ANY CLEANING
BE DONE WHEN THE APPLIANCE HAS COOLED.
2.4.2 Ensure that
extraction canopy
is on.
2.4.3 Ensure that
main gas supply
is turned on.
2.4.4 Turn
control knob
to
maximum temperature
position.
2.4.5
Press the control knob
and gas will begin to flow.
2.4.6 Light the burner using a
spark ignitor button
, this may need to be pressed a few
times.
Hold the control knob
for a further
20 seconds
before releasing.
2.4.7 If the burner
does not
remain lit,
wait 20 seconds
and repeat from section 2.4.4.
2.4.8 Once lit turn the control knob to the temperature required.
2.4.9 At the end of service ensure that the control knob is turned to the OFF position.
APPLIANCES THAT ARE IN USE MUST BE SUPERVISED AT
ALL TIMES.
APPLIANCES MUST BE TURNED OFF AT END OF SERVICE