Falcon 1200 Mercury Induction, User'S Manual & Installation Instructions

Page: 38 / 48

INSTALLATION
Check the appliance is electrically safe when you have finished.
34
Make sure the inner
rail is pulled forwards
ArtNo.010-0004 Moving the cooker
Fitting the Drawer
1. To fit the drawer, pull the side rails fully out ( Fig. 8.19 ).
2.
Carefully move the drawer back between the rails and
rest it on the side rails.
3. At each side, hold the front of the drawer and pull the
side rail forward so that the clips click into position,
holding the drawer to the side rails ( Fig. 8.20 ).
Completing the Move
Open the grill door and right-hand oven door so that you
can get a good grip on the bottom of the fascia panel as you
move the oven (Fig. 8.21) .
Carefully push the cooker backwards off the pack base.
Remove the pack base tray.
Position the cooker close to its final position, leaving just
enough space to get behind it.
n
Do not use the door handles or control knobs to
manoeuvre the cooker.
Fig. 8.19
Fig. 8.20
Fig. 8.21