Falcon 1200 Mercury Induction, User'S Manual & Installation Instructions

Page: 25 / 48

21
Grill pan
Grill tray
Telescopic rail
Telescopic rail
ArtNo.331-0005 Removing the grill rail
Glide-out Grill
n
Before you remove any of the grill parts for cleaning.
make sure that they are cool, or use oven gloves.
The grill pan and grill tray assembly can be easily removed for
cleaning.
Wash the grill pan and trivet washed in hot soapy water, or
using our recommended Rangemaster cleaning solution.
After grilling meats or any foods that soil, leave to soak for
a few minutes in the sink immediately after use. Stubborn
particles may be removed from the trivet by using a nylon
brush.
Alternatively, wash the grill pan in a dishwasher.
To remove the grill pan pull the tray assembly forwards (
Fig.
5.2
) and then lift the grill pan clear of the grill tray assembly
(
Fig. 5.3
).
For safety, push the grill tray back into the grill chamber.
If you need to remove the telescopic runners to allow
cleaning of the grill chamber, first remove the grill tray then
you can unhook them from the grill chamber sides (
Fig. 5.4
).
Wipe the sides clean with a soft cloth and mild detergent.
DO NOT put the side runners in a dishwasher.
Once you have finished, hook the side rails back onto the
sides of the chamber. Pull the telescopic rails out and fit the
grill tray onto them, making sure to locate the cut-outs onto
the telescopic runner tabs ( Fig. 5.5 ).
Replace the grill pan.
Control Panel and Oven Doors
Avoid using any abrasive cleaners including cream cleaners,
on brushed stainless steel surfaces. For best results, use a
liquid detergent.
The control panel and control knobs should only be cleaned
with a soft cloth wrung out in clean hot soapy water – but
take care that no surplus water seeps into the appliance. Wipe
with a clean dampened cloth then polish with a dry cloth.
The oven doors should only be cleaned with a soft cloth
wrung out in clean hot soapy water.
Fig. 5.2
Fig. 5.3
Fig. 5.4
Fig. 5.5