6/16
1
2
1
3 4
2 3 4
I
II
III
IV
V
VI
VII
IN/EX
VIII
IX
IN/EX
Characteristics of the remote
Note!!!
ZWP SA4 is a remote intended to control the AMZ Z-Wave
Solar awning blind. Using other controllers is possible but it can cause
faster wearing off the batteries of these controllers due to the using
awakening function which extends required time of the controller
activity. Therefore it is possible to program the awning blind to one of
the controllers (e.g. ZWP1 0 remote, ZWK or ZWG keyboards) offered
by FAKRO or any controller of other manufacturer equipped with the Z-
Wave module.
I – button for channel selection
II – button for manual mode selection
III – button for semi-automatic mode selection
IV – button for automatic mode selection
V – operating button – for rolling up the awning blind
VI – stop button – for stopping the awning blind in requested position
VII – operating button – for unrolling the awning bind
NOTE!!!
Programming
button IN/EX and 3VDC
button cell battery is
positioned under back part of
the cover.
NOTE!!!
Older controllers of
the Z-Wave system cannot
operate awakening function
of energy-efficient devices
such as the AMZ Z-Wave
Solar awning blind.
VIII
– 3V button cell battery
IX
– IN/EX programming
button
1 – active channel no. 1 – remote control of the awning blind no. 1 by using
operating buttons
2 – active channel no. 2 – remote control of the awning blind no. 2 by using
operating buttons
3 – active channel no. 3 – remote control of the awning blind no. 3 by using
operating buttons
4 – active channel no. 4 – remote control of the awning blind no. 4 by using
operating buttons
1 ,2,3,4 – remote control of the group of awning blinds simultaneously (max.
4 awning blinds)
