fakro AMZ, User Manual

Page: 15 / 16

15/16
1 1
2
II I
1
2 3
III
1
2 3 4
IV
1
1
t=3sec.
2
3
1
2 3 4
II
1
I
1
1
t=3sec.
2
3
1
1
4
4
Checking battery charge level
1 . Choose with the SELECT (

) button appropriate channel on which
the awning blind is programmed, e.g. 1
2. Press the button (

) and hold for 3 sec. until LED of the channel 1
starts blinking
3. Channel LED blinks for about 1 0 sec.
4. Press button (

). Awaiting time for pressing (

) is about 1 0 sec.
The inquiry concerning battery charge level is sent to the device. In
response the device receives message displayed with the use of the
controller's LEDs:
I – 1 (25% battery charge level),
II – 1 ,2 (50% battery charge level),
III – 1 ,2,3 – (75% battery charge level),
IV – 1 ,2,3,4 – (1 00% battery charge level)
Checking opening / closing status
1 . Choose with the SELECT (

) button appropriate channel on which
the awning blind is programmed, e.g. 1
2. Press the button (

) and hold for 3 sec. until LED of the channel 1
starts blinking.
3. Channel LED blinks for about 1 0 sec.
4. Press button (

). Awaiting time for pressing (

) is about 1 0 sec
The inquiry concerning battery opening / closing status is sent
to the device. In response the device receives message displayed
with the use of the controller's LEDs:
I – 1 (0% - the awning blinds completely closed)
II – 1 ,2,3,4 (1 00% - the awning blind completely open)
Additional functions