Operation
15
Remote Control
Fig. 11
Programming
Fig. 12
Description Fig. 11
1.
Robot ON/OFF
2.
“All” choose all or close the dock station indicator
light.
3.
“STOP” button
4.
“TIME” set of current time
5.
“UV” light on
6.
“SET” booking cleaning set
7.
“SPEED” speed selection
8.
“AUTO” auto cleaning
9.
“SPOT” spot cleaning
10.
“OK” confirming button
11.
Programming “UP” button
12.
Programming “down” button
13.
Programming “left” button
14.
Programming “right button
15.
Auto charging: Press the “UP” button and immedi-
ately afterwards the “ON/OFF” button.
16.
Transmitting signal
17.
Week display
18.
The current time display
19.
An appointment time display
20.
Speed
Coding of the Remote Control and the Robot (Fig.
12)
(only if replace or added parts, or malfunction occur).
1.
Check that the batteries of the robot vacuum and
the remote control are sufficiently charged.
2.
Turn the robot off. To do so, set the operating
switch (
20
) to the OFF position.
3.
Press the OK key
10
, no loose it.
4.
Power on the robot.
5.
Loose the OK key when the main body sounds
“beep” for 2 times, finish the progress.
If you fail to hear of “beep” for 2 times, repeat the
above steps.
18
19
1
11
13
12
3
6
9
8
7
5
4
2
14
10
15
20
16
17
