Cleaning and care
21
Fig. 25
Fig. 26
Fig. 27
Clean the collision sensors (25) und stair sensors
(27).
Keep the infrareds clean so that the robot vacuum can
operate correctly.
1.
Clean the sensors with a piece of cotton or a soft
cloth (
Fig.25
).
Cleaning the Appliance
Check that no water enters the appliance.
Clean the appliance after using it for the first time,
immediately after each use and after a long period
without use. You will thus ensure the correct operation
of the appliance and prolong its useful life.
1.
Clean the outside of the appliance with a damp
cloth. Do not use abrasive products or solvents.
Replacing the batteries of the virtual barrier (Fig.
26)
1.
Turn battery cover lock (
6
) until the cover is released
(
5
).
2.
Place the batteries (2 x mono cell) in the compart-
ment intended for this purpose. Check that the positive
and negative electrodes are in the proper positions.
Remove the batteries if you are not going to use the
robot vacuum for a long period of time.
Replacing the batteries of the remote control (Fig.
27)
1.
Open the battery compartment cover.
2
. Place the batteries (2 x AAA) in the compartment
intended for this purpose. Check that the positive and
negative electrodes are in the proper positions.
Remove the batteries if you are not going to use the
robot for a long period of time
.
5
6