Charging the battery
9
Charging the battery
Fig.1
Charging using the dock station
ATTENTION!
Only use the charger and dock station supplied. Do
not use any others.
The charging time is approximately 4 hours.
The battery must be charged completely before using
the appliances for the first time.
NOTICES!
Whilst charging, the charging indicator
2
of the dock
station and control panel of the robot will flash (
17
).
Once charging is complete, the control panel will stop
flashing and remain lit.
Do not turn off the charging station while vacuuming,
as the robot will return to it for charging, if the battery
charge level drops too low.
1
Charger connector
2
LED ON light
3
Coding key
4
Infrared receiver
5
Charging contacts
NOTICES!
Do not place any objects near the dock station and
ensure that the surrounding area is free from items of
furniture or obstacles (see recommended distances in
the
Fig. 2
).
The robot will not find the dock station if there are ob-
stacles. Place the dock station in a clear, unobstructed
area.
The robot will not find the dock station if the infrared
signal transmitter
4
is covered.
Fig. 2
1.
Place the dock station on a clean floor and against a
vertical wall.
2.
Connect the charger (
5
) to the dock station con-
nector
1
.
3.
Plug the charger into the mains. The LED ON light
2
will light up.
4.
Run the charging station´s power cord alongside the
wall, otherwise the robot could get entangled in it.
5
4
3
2
1
