USAGE
23
GB
1-Put the appliance on to the flat floor before plug in. Turn
the safety filling tap to open it and place the special funnel
to the water fiiling tube as seen on the picture below. Start
to fill the water with pressing the funnel softly. When the
water capacity becomes full, water comes from the
overflow hole. Then stop filling the water, take the funnel
slowly. The water inside the funnel will be filled to the tank.
Turn the safety filling tap counterwise to close it. Never fill
much water more than its capacity.
2-After filling the water, choose a suitable accesorry
according to the place you clean and plug in. Red light will
be on. It shows the water tank starts to warm up. Steam
will be ready approx. in 10 min. and green light will be on.
Appliance is ready to use. In use, the red light will come
into effect from time to time. In this case, you can continue
to clean.
ATTENTION!
Do not fill the water to the appliance under the tap, use
the funnel given or a measuring cup.
NOTICE!
Do not over-tighten the cover to avoid damage of the
gasket as it is immerpeable.
NOTICE!
When refilling during the cleaning or before cleaning the
water tank of the appliance make sure the device is
unplugged.
Summary of Contents for JAWS
Page 31: ...NOT NOTES 30 ...
Page 32: ...NOT NOTES 31 ...
