28
TROUBLESHOOTING
GB
Troubleshooting
Problems
• Excessive water
comes at first usage.
• Steam comes from
side of the safety filling
tap.
• Product lamp does
not light up when
plugged in
• When the product is
plugged, the fuse
blows.
• If steam or water
leakage from the body
of the product.
• Not enough steam
• Deformation of
accessories and
brushes.
• Product does not
work or hear.
Possible Reasons
• Condensed water inside
hose and accessories may
be discharged.
• Too much water can be
filled.
• The appliance is used
without any accesory
• Gasket of safety filling tap
can be ruptured.
• Safety filling tap was not
closed properly.
• Thermostat can be
defective.
• Thermal fuse has tripped.
• Other products may be
running on the same line.
• The product may short
circuit.
• It can be filled with
excessive water or water
drops during filling.
• There is a problem in
connections.
• Steam regulation button
can be at lower.
• Defective trigger or steam
regulation button
• Use of bad and difficult
conditions.
• Product can not be
plugged properly.
• Defective water tank or
thermostat
Solutions
• Continue to steam, the steam will return to
normal.
• Drain the excess water in a bucket by
pressing the steam trigger. Next in use, use
the funnel.
• Use a suitable accesorry.
• Use spare safety filling tap gasket.
• Unplug the appliance, close the safety
filling tap preperly after the unit cools down.
• Refer to Fakir authorized service.
• Refer to Fakir authorized service.
• Unplugged other products.
• Refer to Fakir authorized service.
• Ürünü fişten çekiniz fazla suyun akması
için bekleyiniz.
• Refer to Fakir authorized service.
• Increase the steam with using steam
regulation button.
• Refer to Fakir authorized service.
• Accessories and brushes are consuma-
bles. To replace them refer Fakir author-
ized service.
• Check the plug of the appliance and
electric connection.
• Refer to Fakir authorized service.
Summary of Contents for JAWS
Page 31: ...NOT NOTES 30 ...
Page 32: ...NOT NOTES 31 ...