Fakir BABILA, User Manual

Page: 34 / 112

34
EN
Espresso
Small Size
40-60 ml
Large Size
90-110 ml
Cappuccino
Small Size
80-150 ml
Large Size
160-300 ml
Latte
Small Size
160-300 ml
Large Size
250-350 ml
Water Tank Refilling
You can remove the water tank and fill it under running water or open the cap of the water
tank and fill from the top.
Amount of water put should be between the Min. and Max. marks. After filling the chamber,
place the chamber on the hooks at the back of the appliance and press it down completely
and close its cap. Make sure that it is properly placed.
WARNING!!
Never use warm or hot water to fill the water tank. Use water at room temperature. Do
not operate the appliance if there is no water inside the chamber or if the chamber is not
connected to the appliance.
Milk Chamber Refilling
If you plan to prepare cappuccino, latte or hot milk, remove the milk container and remove it
from the appliance.
Pour cold milk between “Min.” and “Max.” levels.
Push the chamber in until it clicks into the appliance.
NOTE!
You can use your preferred type of milk, so you can use full fat, low-fat, organic or soy
milk. The amount of milk, brand and type of milk you use will be effective at the foam
rate of milk. You can always get better results in whole milk.
NOTE!
In order to obtain a more dense and homogeneous foam, use whole milk or low-fat
milk at refrigerator temperature. Foam quality decreases as the temperature of milk
increases.