Fakir BABILA, User Manual

Page: 44 / 112

44
EN
Problem Possible Cause Remedy
Aplliance does
not turn on
Appliance is unplugged. Plug the appliance
Power switch off Turn on the power switch
No coffee flow or
minimum flow
No water in the water tank.
Fill the water tank with
water.
The coffee rate in the filter is high. Reduce the coffee amount
The coffee is too compressed in the
filter. Do not compress too much
coffee.
The coffee machine is not plugged in. Plug in.
The appliance has scaling
Apply the descaling process
for the appliance as
described in the cleaning
section.
Coffee was taken too thin.
Increase the thickness of
the coffee.
During brewing
coffee, the coffee
overflows through
the coffee holder
The filter holder is not fully locked.
Lock the filter holder fully
into the brewing head.
The seal of the brewing head has lost
its elasticity or it is dirty.
Replace the brewing head
seal from authorized service
and clean the brewing head.
Filter holes are clogged
Clean the holes of the filter
holders
There is too much coffee in the filter.
Reduce the coffee on the
filter.
Milk is not
foaming enough
or milk does
not come from
the milk foam
dispensation
tube.
The water in the chamber is depleted.
Fill the water tank with
water.
Milk is not cold enough.
Replace the milk in the milk
chamber with cold milk.
Milk foam dispensation tube is blocked
Clean the milk foam
dispensation tube.
The appliance may be scaled. Descale the appliance.
Coffee flows very
fast
Coffee thickness is high. Thin coffee thickness.
There is not enough coffee in the filter.
Increase the rate amount of
coffee in the filter.