15
-
In the event the smoke conduct has to be diverted, there must not be more than two
inclinations and the angles must not exceed 45º
-
Never install a damper. This product is a stove with controlled combustion. We can
regulate the draw by means of the entries of primary air.
When installations are made in places with strong winds and/or when the pipe extends
more than 1 metre above the roof, it is necessary to place tensors to support the pipe.
If work, modifications or repairs have been carried out near the pipe or the stove after
installation, check that none of the details specified in this User Manual has been altered.
7. LIGHTING
Before starting your appliance, check that the refractory stones in vermiculite are correctly
positioned.
7.1.
FUEL
: Use firewood
The most recommended wood corresponds to that which does not have much resin and which
has been drying in the open air for between one and two years, making sure there is no more
than 20% degree of humidity. Take into account that wood with an excessive degree of
humidity does not heat, it burns badly, it coats the glass with creosote and vapour, as well as
favouring the deposit of soot on the appliance, glass and smoke conducts (chimney).
Never burn salty wood, wood found on the beach, treated wood or wood that has been found
in a salt-water lake, since this type of fuel could cause corrosion in the fuel chamber.
Never use chemical fuel or liquids to light the stove, such as alcohol, petrol, naphtha,
kerosene, etc. These kinds of products must be kept away from the stove when it is in use.
It is totally forbidden to burn painted paper, plastics, cardboard, mineral fuel, coal, etc. This
could seriously damage your stove, pollute the air and even cause it to catch fire.
NEVER BURN MANUFACTURED FIREWOOD THAT CONTAINS CHEMICAL ADDITIVES.
Any damage caused by chemical products or salt are excluded from the guarantee.
