12
The pipes must be positioned on the outlet opening with the male part of each pipe facing
towards the stove. This will stop the creosote/soot caused by condensation from falling
down the pipe and onto the stove (A) facing towards the stove and (B) facing upwards.
All the pipes, including the one that is in the smoke outlet, will be attached with two
metal screws.
If possible, the stove can be installed in the fireplace under the chimney. Take the
necessary precautions when passing through forged areas, use insulated double pipes
in the cases there is a risk of fire. The pipes will not pass through attics, roofs,
cupboards or any similar hidden area. When it is necessary to pass through a wall, or a
part of a building, the installation will be carried out in accordance with the NFPA 211
or CAN/CSA-B365 regulations of the Installation Code for Electrical Appliances for solid
fuel burning.
6.2. Chimney:
WARNING: THIS APPLIANCE IS NOT SUITABLE FOR INSTALLATION IN A CHIMNEY SYSTEM
THAT IS SHARED WITH OTHER APPLIANCES.
This product must be connected to a chimney that complies with the requirements for this
type of HT chimneys in the Regulations on UL 103 chimneys or a code-approved brick
chimney with a flue liner.
