14
6.3. Height of the chimney.
The chimney should be at least 36” (90cm) taller than the place where it meets the roof
and at least 24” (60cm) taller than the highest point of the whole structure within a radius
of 120” (305cm). The minimum total height of the conduct from the top of the stove to the
tip of the chimney outside must be of at least 144 inches (366cm), in order to obtain a
correct draw.
DRAW
: a correct draw will enable you to obtain maximum performance and enjoyment from
your appliance.
The tendency of hot air rising creates the draw.
When the stove is lit, the hot air will rise up the smoke conduct and will go outside. The
conduct heats and maintains the draw. Until the stove and the chimney are both hot, the draw
will not function perfectly. The conduct must be clean and in perfect condition in order to
obtain a good draw of the stove and to keep the flame alive.
The position, size and height of the smoke conduct affect the draw.
It is necessary to take the following points into consideration:
-
The diameter recommended by the manufacturer maintains a good draw.
-
The stove and its evacuation pipe will be kept hot if they are placed inside the home,
thus allowing a better draw.
-
The stretches of draw that have to be placed outside the home must be adequately
insulated, in order to keep the smoke hot, thus ensuring a correct draw.
-
The height of the chimney affects the draw.
A
2" (minimum)
B
10" (minimum)
C
3" (minimum)
